When a pet appears in the house, you should worry about creating comfortable conditions for it. This is expressed not only in determining the place for feeding. For him, you should prepare your own corner for sleeping. The best solution is to buy or create a do-it-yourself dog bed. There are many options for making a house, for which different materials at hand are used. The most interesting ideas are outlined in the article.
- 1 Rules for choosing a ready-made bed or sofa for a dog
- 2 Design of dog beds
- 3 The dimensions of the berth and the filler for the bed
- 4 How to make a dog bed: unusual solutions
- 5 How to care for a dog's sleeping place with your own hands
Rules for choosing a ready-made bed or sofa for a dog
The pet should have its own convenient and comfortable place to rest. In the store, you can buy a bed for a dog, taking into account its size and breed. You can also make a berth yourself from fabric, wood, cardboard, plywood and other various materials.
Dog beds are classified according to breed. There are sleeping places for animals of large, medium and small size.
For small and medium breeds of dogs, you should choose semi-closed or closed beds. Such beds should be equipped with high sides, which creates additional comfort for the pet and a sense of security. This option is also suitable for lazy people and phlegmatic people who will find it convenient to observe what is happening in the room, lying on a soft side of medium height.
For energetic and active pets, it is better to choose pillows for dogs or models with low sides. For impudent and aggressive dogs, an anti-vandal version of the lounger is suitable, which is able to endure contact with the pet's claws and teeth. A large dog bed can be a simple mattress.
Helpful advice! The presence of sides in the dog bed provides reliable protection of the pet from drafts.
An important criterion when choosing a ready-made bed for a pet is the material from which the product is made.It must meet the requirements of environmental friendliness, wear resistance, durability, safety, and good air permeability.
When determining the dimensions of the structure, such recommendations should be taken into account. The width of the structure is selected based on the value of the distance from the nose for the base of the dog's tail with an allowance of 25-30 cm. The depth of the product should be 20 cm more than the height of the pet.
Important! A correctly chosen bed for your pet will contribute to its comfortable stay on it, protecting the animal from diseases of the joints and kidneys.
The shape of the lounger is selected based on the pet's temperament. For an animal who likes to sleep curled up, you can purchase an oval or round lounger with small sides around the circumference. For dogs that sit comfortably in a dream, while stretching their paws forward, rectangular models will be the best solution.
Design of dog beds
Depending on the design, the couches can be presented in the form of a sofa, sofa, bed, cradle, basket, house, playpen or soft bedding without a rigid body.
The latter option is preferred for large dog breeds. In this case, it is worth giving preference to models that have a coating at the bottom in the form of pimples or rubber bands, which will extend the life of the product. This is the most budget type of lounger, decorated on the outside with a thick fabric, and inside filled with foam rubber. A more durable and wear-resistant option is a quilted mattress, which does not get knocked into lumps during use. It can be purchased ready-made or made from a suitable fabric. For this it is better to choose the material "anti-claw".
A lounger with bumpers is also an inexpensive option. It is represented by a mattress with soft sides 10-15 cm high. The product can be made on a wooden or metal frame. There are models with legs, thanks to which the height of the bed increases, providing protection for the pet from drafts.
A sofa for dogs is a small copy of a traditional piece of furniture. Such a structure is made using the same technology as for people. The product consists of a frame, filler and upholstery fabric. This lounger can be additionally equipped with a removable cover, pillows and blanket. An analogue of a sofa is a crib with wooden sides and a mattress.
For the shyest little friends, the ideal dog crib is a small house that can be open or closed. Mostly it is made in a wooden frame, sheathed with soft material or leather. There are insulated houses for small dog breeds that are extremely sensitive to cold.
The basket looks like a lounger with bolsters. However, it is made of plastic or woven from a vine. Inside there is a comfortable soft mattress. Today on sale you can find a unique model, which combines a sunbed, a house and a bedding. The product has an oval shape and is made in the form of a soft mattress. There is a zipper around the circumference, which unfastens the product, turning it into a house with a soft roof.
The advantages of creating a do-it-yourself bed for a dog
Today, specialized stores offer a wide range of dog beds of various shapes, sizes and designs. However, when buying a quality product, for the creation of which an expensive, wear-resistant and practical fabric, a good filler was used, you will have to spend a lot.
You can save a lot by creating a unique creation by making a dog bed with your own hands.For this, there are many ideas, for the implementation of which simple improvised materials and household items are used.
A homemade structure can be created in any shape and size, taking into account not only the dimensions and breed of the animal, but also the availability of free space in the house. In this case, it will be possible to locate the sleeping area in a strictly designated area, which will not only be convenient for the pet, but also will not create discomfort for household members.
It is possible to sew a bed for a dog with the prospect of an animal growing up, given the characteristics of the breed. The product can have an interesting shape, design design, due to which it will become not only comfortable for the pet, but will also delight the eyes of the owners, delight the guests.
A home-made bed is the best solution for creative people, because when creating it, you can show your full potential, original taste, while emphasizing individuality.
Things to Consider When Designing a Dog Bed
Before you sew a dog bench with your own hands, it is worth considering some points. First of all, you should decide on the place. For this, a secluded corner, protected from drafts, is chosen.
It is necessary that the place is stationary and does not move unless necessary. It should also not be walk-through, which will create comfort for the animal. One of the requirements is a good view of the room, since it is important for the pet to always see its owner.
Before you sew a bed for a dog, you should take care of the correct choice of fabric. It must be sufficiently dense and durable. The linen should be well washed and dry quickly. A fabric that repels water and wool is ideal.
The type of fabric is selected based on the breed of the pet. Smooth-haired dogs will be more comfortable on a bed made of velor, plush, flock, velveteen, felt, which accumulate and retain heat. Pets with thick coats will love a bed made of linen, cotton, denim or tapestry. For a large animal, you can even make a bedding from a carpet.
Important! The dog bed should not be made of synthetic fabric, which accumulates static electricity and can provoke allergic reactions.
Pay attention to the color of the fabric. It is worth giving preference to a small print in calm pastel colors. Too light colors will get dirty quickly, and on very dark mattresses, wool is more visible.
The dimensions of the berth and the filler for the bed
Before you make a bed for a dog with your own hands, it is necessary to determine the dimensions of the sleeping place and its design, which is selected based on the size of the pet and its favorite position during sleep. The bunk bed should be designed to accommodate the puppy's growing up and changing habits with age.
Large breeds like to sleep with outstretched paws, so the sleeping place should have a rectangular shape with small sides. A small dog will like a cozy foam-rubber house with high sides.
Packing is also important. Holofiber and synthetic winterizer are unsuitable for such purposes. The material is able to retain pet grease. You should also avoid using feathers and down, which are a habitat for microbes and parasites. A good option would be foam rubber brand 35-45.
The best solution for making a bed for a large dog is to use coconut fiber. It is an environmentally friendly material that does not cake, does not absorb moisture and is very durable.He doesn't need much care. It is enough to periodically rinse it under a hot shower and dry it well.
Helpful advice! For a small dog, it is better to equip a house on a stand, since such pets are often freezing.
Minimal attention should be paid to decorating the dog bed. The presence of beads, bows, various hanging things will arouse interest in the pet, who wants to tear them off, gnaw and swallow them. When creating a soft bed, special attention is paid to the quality of the threads: they must be as strong as possible.
How to determine the size, type of fastening and sheathing. Basic materials for manufacturing, instructions and drawings.
It is better to put a removable pillow on the dog's bed, which can be washed periodically. It is desirable to make several of them. For the couch, you can also sew two covers: from warm fabric - for the winter, from linen or cotton - for summer.
Important! Periodically, the animal's sleeping place should be treated with antiparasitic agents.
A simple budget dog bed made from an old sweater or jeans
The easiest and cheapest option for creating a pet bed is to use an old knitted sweater. A sweatshirt or coarse knit is ideal. Such a sleeping place will be special for a pet, since it retains the owner's smell even after several washes.
Making a do-it-yourself sweater bed for a dog involves the following steps. The first step is to make a horizontal line from one armpit to the other. The result should be two parts. The larger bottom piece will become the bottom of the bed, while the chest and sleeves will form the sides of the bed.
The lower part is filled with the selected filler. You can also use an old pillow of the correct size for this. The resulting bag must be tightly sewn with threads or pulled off with a lace. The next step is to sew on the sleeves. The process is carried out in such a way that a tunnel is formed from them, which must be filled with filler through the collar.
Important! The sides of the bed should be resilient enough to provide better comfort for the pet and longer life.
Next, the neck is sewn up. The side of the sleeves is attached along the perimeter of the lounger to the bottom of the structure. The result is a do-it-yourself soft sofa for a dog.
More sophisticated designs can be made from old jeans. Before sewing a bed for a dog, the product is cut into 12 rectangles of the same size, 24 cm high. The strips should be put right sides to each other and sewn along the edges. The seams must be ironed out. The result is a strip of patches 150 cm long. Its ends are connected into a ring and sewn together.
Next, a circle with a radius of 24 cm is cut out of jeans. A layer of padding polyester is applied to the bottom of the bed. An old towel is also suitable for this purpose, which is sewn in half and stuffed with filler. The sides are bent in two and sewn to the bottom. When about 10-15 cm remains to be sewn, it is filled with filler. You can also insert a wire into the tunnel for structural stability. The remaining hole is sutured.
Large wooden dog bed
For a large dog, it is better to make a bed of wood. Soft litter under the heavy weight of the pet quickly deforms and becomes unusable. The animal will sit comfortably on a rigid wooden frame for a comfortable rest.
Helpful advice! A wooden dog bed is suitable for both indoor and outdoor use.
For a wooden lounger, you need boards of the required size. It is not necessary to use new elements. You can disassemble the old wooden structure, sand all its parts well and cut the board into blanks of the required parameters.
You will need four wooden elements for the bed. One is used for the bottom of the structure, and the sides are created from the other three. Self-tapping screws should be used to fasten the elements. Discard nails as they can cause injury to the animal. The heads of the screws must be sunk into the cavity of the material so that the pet does not cling to them. To strengthen the structure, it is advisable to additionally use metal corners.
A wooden lounger for a large bed can be supplemented with a cabinet in which it is convenient to store pet toys. For a comfortable rest of the dog, the bed is covered with a blanket or pillows.
You can also create a wooden dog bed from an old pallet, using it as the base of the structure and adding it with wooden boards (you can do without them). A box made of wood of the required size is also suitable for such purposes.
How to sew a do-it-yourself dog bed from fabric
Before you sew a do-it-yourself bench for a dog (a photo of a pattern can be found on the Internet), you should prepare a thick fabric, stuffing material, paper for patterns, scissors for cutting, thick threads and a sewing machine.
Helpful advice! Most fabrics shrink after washing, so it is recommended to soak, dry and iron the fabric before sewing.
At the first stage, a pattern for a dog bed is made of paper, based on the dimensions of the animal. The length of the structure must correspond to the length of the animal with extended front legs, and the width must not be less than the height of the pet. Two parts are cut out: the bottom of the structure and its sides. Allowances for seams and a margin for hem along the edges of the sides should be provided in case of framing the lounger with an elastic band.
A do-it-yourself dog bed pattern is applied to the fabric on which it is outlined with chalk. With the help of scissors, three sides and the bottom of the product are cut out. Next, the elements are stitched. To get a neater product, the seams must be fastened with straight stitches.
Helpful advice! It is recommended to pre-process the edges of the workpieces with an overlock so that they do not crumble, and the bed will last longer.
When stitching the elements, leave space for inserting the filler, after which the edges of the product are finally sewn. The sides are connected to each other using braid or thin strips of fabric. They can be untied if necessary and the bed can be enlarged. It is advisable to sew the sides together, which will make the product stronger and more durable.
Other DIY fabric dog bed options
You can make a round bed for a dog out of fabric. The product pattern consists of two elements: the bottom and the side along the contour of the structure. The last element is made in the form of a ring with an inner diameter equal to the size of the bottom, and the outer one is selected depending on the side height. For the bottom, two allowances are taken into account - the outer and the gap for the bottom cut.
There are two fabric options to choose from for the bottom. For the underside, which will be in contact with the floor, it is recommended to choose a denser option in the form of burlap or jeans. The top is better made from a more decorative material.
The bottom is sewn together with a pillow and filled with filler.A side in the form of a tunnel is sewn around the circumference, which is filled with stuffing. A sleeve for elastic or tape is provided in the upper part of the board along the entire perimeter.
A do-it-yourself bed for a large dog can be made in the form of a mattress. To do this, you need a thick fabric for sewing a cover and filler. It is better to make the cover removable in order to be able to wash it periodically. To do this, insert a zipper lock into one of the sides.
To create a mattress for a dog, two pieces of the same size are cut out of fabric, which are sewn together with the front sides inward, while leaving a hole for the filler. You can also sew rectangular inserts around the perimeter, the width of which is equal to the height of the padding. The filler should be laid in several layers.
How to make a do-it-yourself dog bed in the form of a house
A bed for a small dog can be made in the form of a house. For the frame of the structure, you will need ordinary packing cardboard. In order for the material to gain the necessary rigidity and strength, it should be impregnated on both sides with diluted PVA glue or water-polymer emulsion and dried well. Dogs will not gnaw such cardboard.
At the first stage, a drawing of the future structure is made with detailing of each element. The dimensions of the house are selected based on the breed and size of the pet. The drawing is created in such a way that all of its elements are folded like a cardboard cube. An entrance is provided here, the width of which should be 5 cm larger than the animal's chest. The height of the structure must correspond to the full height of the pet.
According to a do-it-yourself pattern of a dog bed, a photo of which can be found on the Internet, the ceiling, walls, floor and roof are cut out of cardboard. The blanks are laid on a single piece of fabric, from which two elements are obtained with a seam allowance. The front and back walls of the structure are cut out separately.
Each structural element is sewn in two parts. The inner cavity contains cardboard. In this case, place should be left for stuffing the blanks with filler. It is necessary to outline and sew the lines delimiting the walls from the floor, the roof from the walls, and also make a seam between the adjacent walls. Foam rubber is inserted into each compartment from the inside of the house.
Helpful advice! A more simplified option is to glue the cardboard case with foam rubber from the inside and frame it with fabric on both sides.
The frame of the house can be made of plywood. To do this, on the basis of the drawing, the structural elements are cut out: four for the wall, two for the roof and one for the floor. Cutting points must be carefully cleaned with sandpaper. The parts are fixed to each other with screws and wood glue. Such a house can be painted with a stain on the outside, pasted over with a cloth with a filler from the inside.
How to make a dog bed: unusual solutions
A do-it-yourself lounger can not only be sewn or knocked out of a tree. For this, pieces of furniture, decor or other various materials are often used.
For a medium-sized pet, you can arrange a sleeping place in an old suitcase. For convenience, a dog mat is placed inside. A small animal will love a basket house, which is ennobled with soft bedding. For small individuals, you can arrange a berth in a wall box or cabinet, which already has sides. For convenience, the inner space is pasted over with foam rubber and thick fabric. This lounger can be placed on furniture legs.
An original solution would be to use a bedside table as a bed for a dog in an apartment, from which all things should be removed, partitions and a door should be removed. Often the entrance is cut out from the side of the bedside table, covering it with a decorative curtain. If the house has an old chest of drawers, you can also make a pet sleeping place out of it. For this, the bottom drawers are removed. Plywood sheets are attached at the base and on the sides. A soft mattress is placed on the bottom.
A comfortable wooden sofa can be obtained from an old table, from which legs should be sawed off. If a coffee table is used, the pet should be placed on its bottom shelf with a rug on it. A comfortable sofa is easy to organize from an old armchair or an ordinary office chair with armrests. An old baby bath with pillows is also suitable as a bed.
A bed for a dog made of an inverted wooden barrel or car tire will look creative and unusual. You can arrange a sleeping place in an old lamp TV or monitor. To do this, remove the entire internal "filling", leaving only the frame. Inside, the space is pasted over with foam rubber and fabric.
How to care for a dog's sleeping place with your own hands
The sleeping place for the dog must be kept clean, which will not only ensure order and a healthy environment in the apartment, but also protect the pet from a possible invasion of pests and the development of allergic reactions.
Once or twice a month, it is recommended to carry out preventive treatment of the do-it-yourself dog bedding with special antiparasitic sprays. It is necessary to regularly clean the litter of animal hair, as its excessive accumulation can cause an unpleasant odor in the room. In addition, flying clubs of wool negatively affect the health of other residents of an apartment or house.
Routine hygienic cleaning should be done using pet-safe stain removers and odor neutralizers to help keep the sleeping area hygienically clean.
A protective cover should be provided for the lounger, which can be easily removed for further washing. It is recommended to make it at least 2-3 times a month, which is determined by the quality of the material and the intensity of pollution. When replacing the cover, the mattress is knocked out without fail.
Helpful advice! To disinfect the lounger, it can be periodically treated with a steam generator.
In the place allocated for rest and sleep of the pet, dry and wet cleaning should be carried out regularly.
A bed for a dog is a necessary element to ensure a comfortable stay of the animal in the house. The convenience of the four-legged friend depends on the correct choice of size, shape and design option. It can be purchased ready-made or made independently from scrap materials using one of the above ideas.