There are devices that do not require a stationary heating system or a coolant for their operation. Their use is convenient in any conditions, even in the absence of any communications. Gas infrared heaters from a cylinder work at the expense of a supply of propane. And although this method of heating a room is by no means the safest, it is quite popular among a wide range of users. Let's try to figure out why.
- 1 Advantages of a gas infrared heater: consumer reviews
- 2 Gas infrared heaters from a cylinder: principle of operation
- 3 How to choose a gas infrared ceramic heater
- 4 Cylinder gas infrared heaters: prices for popular models
- 5 How to make a gas heater for a garage with your own hands
Advantages of a gas infrared heater: consumer reviews
According to consumer reviews, the first and main advantage of heating with infrared gas heaters is the absence of requirements for connection to any networks. In fact, such a heater can be installed anywhere.
All that is needed for the full operation of the device is a cylinder filled with liquefied gas. If you believe the reviews, gas infrared heaters for summer cottages may well work if they are connected to a centralized gas supply system.
Manufacturers claim that such equipment can be used anywhere: in an apartment of a multi-storey building, in a private house, in a garage, in a greenhouse, etc. At the same time, the device is quite mobile and, if necessary, can be easily transported. In addition, there are several types of heaters, allowing you to choose the most suitable option.
All gas heaters can be of two types:
- those that heat the surrounding objects;
- those that give off heat to the air.
If we talk about infrared heaters, then they work according to the following principle: objects are subject to heating, which, in turn, give off heat to the air. This method is considered the most effective, but it has a significant drawback: objects that do not fall into the range of the device remain cold. It is pleasant to sit near such a heater, for example, while reading a book, but sufficient power is required to heat an entire room.
Gas infrared heaters from a cylinder: principle of operation
The use of infrared heaters has some peculiarities.For example, in order for the device to cover a large area, it must be placed as high as possible above the floor surface. In this case, the range of its impact will be as wide as possible, and the room will be warm enough.
Gas infrared heater consists of the following elements:
- a body made of metal;
- heat exchanger;
- automatic control unit;
As for the sizes of heaters, they can be very different: from small compact models to large-scale devices designed for large rooms, warehouses, garages, etc.
Note! Please note that a certain distance must be maintained between the heater and the gas cylinder. Otherwise there is a risk of an explosion caused by a flame inside the device itself.
If we talk about the principle of operation of the device, then the following processes can be distinguished:
- the flow of gas from the cylinder into the reducer, where the gas pressure decreases, after which it enters the heater nozzle;
- mixing of gas with air and their joint ingress into the ceramic panel;
- uniform combustion of gas and, as a result, complete absence of combustion by-products;
- heating the ceramic component of the heater and further transfer of heat through infrared radiation.
As a result of the fact that the device heats the surrounding objects, the overall air temperature also rises. Therefore, infrared gas heaters are perfect for a summer cottage, garage or greenhouse.
How to choose a gas infrared ceramic heater
Before you buy a gas infrared heater for a summer cottage or home, you need to familiarize yourself with a number of characteristics that determine the purpose of this device. Depending on the power, as well as design features, each of the options is most suitable for specific operating conditions.
The main guideline when choosing infrared gas heaters is their safety, so it is worthwhile to show the utmost care and attention. A mandatory requirement for the purchased model is a built-in automatic shutdown system, which is triggered when the product rolls over or is tilted. Today this security measure is considered mandatory.
Note! Another useful feature is the automatic shutdown of the gas supply in case the burner is accidentally extinguished.
In the choice, the location of the heater is also important. So, for residential premises, a special sensor is required, which will indicate the level of carbon dioxide in the room. Indeed, in the process of combustion, carbon dioxide is released, which can accumulate. In large quantities, it is unsafe for both health and human life.
In the presence of a special sensor, the level of carbon dioxide in the room is regulated as follows: the device regularly takes a sample, determining the current level. At the same time, he checks it against the specified boundary. If the current level has reached the limit, the device switches off automatically.
How to choose an infrared heater for a summer residence
In order to buy a gas infrared ceramic heater, you need to focus on the mode in which you plan to use it. Perhaps you will turn it on periodically when you come to the country for a few days. If long-term operation is planned, then the economy of the device will play a significant role, because its prolonged use will entail certain costs.
When choosing an infrared heater for a summer residence, be sure to pay attention to the power of the device. There is a simple rule to reckon with: the more powerful the device, the less mobile it is.And, accordingly, vice versa. A simple and lightweight appliance will never be able to deliver the same power as a massive bulky heater.
The choice in this case is not affected by the total area of the room. After all, such devices do not heat the entire room, so its size does not matter. Think in advance where you will install the heater and what area it will need to heat.
Useful advice! It is always better to purchase a heater with a power reserve and not use it at its maximum. This way you can heat a larger area if necessary.
The appearance of the device will also play an important role, because everyone wants the heater to naturally fit into the environment and not create visual discomfort.
Despite all its virtues, infrared heater nevertheless, it cannot be considered a full-fledged heating device when it comes to permanent residence in the house. Its use is fully justified as an alternative option for short periods of time, or as an additional source of heat.
How to choose an infrared gas heater for your garage
Buying a gas heater for a garage is one of the most difficult tasks. After all, initially this room is filled with a large amount of combustible substances, which, in combination with such equipment, pose a threat of fire. Therefore, more stringent requirements are imposed on the safety of gas equipment.
By the type of construction, portable models are considered the most suitable for a garage, since, if necessary, the direction of the heat flow can be changed. Ideal for this type of room may be the use of a ceiling gas infrared heater.
Useful advice! Think in advance about how the gas infrared heater will be serviced and repaired. There should be a free approach to all its elements.
Cylinder gas infrared heaters: prices for popular models
Due to the widespread popularity, it will not be difficult to buy a gas infrared heater from a cylinder.
Prices for some popular heater models:
|Name||Power, W||Heating area, m2||Size, mm||Weight, kg||Average price, rub.|
|Floor standing gas infrared heater Ballu Bigh 4||4500||60 and more||270 (length)||2,8||2800|
|Ballu Bigh 3 infrared gas heater||3000-4500||45||338x278x372||2,3||2400|
|Gas infrared heater Pathfinder Hearth with cooking facilities||1500||15||275x275x180||1,8||3000|
|basic infrared heater NeoClima UK-02||2500||25||192x150x86||1||1300|
|Outdoor gas infrared heater Master 34 CR||3400||160x350x460||2,6||2200|
Using the reviews as a guide, the Ballu Bigh 55 gas infrared heater is also a very good option. It has a high power of 4200 W, and also provides the ability to install a balloon directly inside the device itself. Of course, this is reflected in its size.
Useful advice! If you want to buy a gas infrared heater for a greenhouse, then you need to choose among street models. Room heaters cannot cope with this task.
How to make a gas heater for a garage with your own hands
The price of a gas heater for a garage is not always acceptable, and in some cases you have to rely only on your own strength. Independent design of heaters has been tested for a long time, and simple and understandable instructions have been drawn up for craftsmen.
Here are some simple rules to keep in mind before you get started:
- The main requirement for both factory and home-made gas appliances is safety. Pay as much attention to this as possible.
- It is better to purchase the elements that are responsible for supplying and shutting off the gas ready-made (factory), as they determine the safety of the entire structure.
- The simpler the mechanism of operation of the device, the better.
- Pay attention to economy, otherwise the use of such a device can cost you dearly.
- Use inexpensive but high quality building blocks to provide a solid foundation.
In order to make a high-quality heater with your own hands, you will need the following parts: a sheet of metal, scissors, rivets and a riveter for installing them, a fine metal mesh, a sieve and a gas cylinder. In addition, you cannot do without a special burner equipped with a valve.
The first step is to attach the heater to the burner. For this, the sieve attached to the metal sheet is circled with a marker. After that, parallel and perpendicular to each other, you need to finish drawing rectangular ears. Moreover, one of them should be 2 times longer than the others. Then, using scissors for metal, you need to cut the resulting pattern.
After that, the elements need to be fastened together: the burner is attached with bolts to the metal circle that was cut out. The ears are wrapped in opposite directions, and a strainer is attached to them, which will act as a diffuser. This is a ready-made element of a homemade heater.
Next, you can proceed to fastening the metal mesh. For this purpose, you must once again draw a circle with ears on a metal sheet and then cut it out. Next, you need to fix the mesh, which is attached to the ears of each of the circles, forming a mesh cylinder.
Useful advice! The most convenient way is to mount with rivets and riveters. In this case, you need to start with attaching the lower part, and only then go up.
When all the elements are ready, you can connect them together and connect the finished product to a power source.
If you cannot make the device yourself, then the main thing that you should be guided by in choosing a gas infrared heater from a cylinder is customer reviews, as well as the technical characteristics specified by the manufacturer. Be sure to consider where exactly you plan to use it, as well as for what purpose. If you take enough time to choose the right model, then the purchased device will surely meet all your expectations.